Chemicals / Coolants / Cleaners

Liquid Steam Cleaning Compound

Designed to penetrate and loosen stubborn contamination, grease, bonded soils, dirt & surface films.


ERSCO No.            Size

CH-255-05          5 Gallon

"Energy Plus" Cleaner Concentrate

A highly concentrated, alkaline based, aqueous detergent designed to be used in a wide array of cleaning applications. Can be used manually, in pressure washers or staeamcleaners.


ERSCO No.               Size

CH-300-05          5 Gallon

CH-300-20          20 Gallon

CH-300-30          30 Gallon

CH-300-55          55 Gallon

Tumbling Parts Cleaner

A non-flammable solvent designed for use in tumbling media parts cleaning machines that utilize steel or ceramic media. 


ERSCO No.               Size

CH-320-05            5 Gallon

Rust Remover

Designed for rust removal and brightening of cast iron and steel parts.


ERSCO No.               Size

CH-340-05            5 Gallon

Rust Prevention Coating

Designed to provide long term protection from rust on any machined or unmachined part.


ERSCO No.                 Size

CH-350-05             5 Gallon

Aluminum Safe Tumbling Parts Cleaner

A powdered, water soluble, aluminum safe compound for fast results in tumbling media parts cleaning machines. 


ERSCO No.               Size

CH-395-10                10 lbs.

CH-395-50               50 lbs.

Petro Solve HF

Designed to give maximum cleaning power while providing protection from rust. Safer than most solvents, flash point above 140 degrees F.


ERSCO No.               Size

CH-405-05            5 Gallon

Carbon Buster

A non-chlorinated, water-based solvent designed for removal of tough carbon deposits. 


ERSCO No.               Size

CH-460-05            5 Gallon

Magnetic Inspection Base

Designed for Magnetic crack detection equipment using a required liquid carrier. 


ERSCO No.               Size

CH-467-05            5 Gallon

CH-467-20           20 Gallon

CH-467-30           30 Gallon

CH-467-55           55 Gallon

Can Glow Fluorescent Crack Detection

Designed for magnetic crack detection equipment using a required liquid carrier. 


ERSCO No.               Size

CH-600-05            5 Gallon

Super Lube

Designed for the protection of finely finished parts before shipment or storage. Provides lubrication, rust & corrosion prevention and water displacing capability.


ERSCO No.               Size

CH-631-05            5 Gallon

CH-631-20           20 Gallon

CH-631-30           30 Gallon

CH-631-55           55 Gallon

Flash Rust Guard

Designed to be applied to bare metal to prevent flash rusting. 


ERSCO No.               Size

CH-635-05            5 Gallon

CH-635-20           20 Gallon

CH-635-30           30 Gallon

CH-635-55           55 Gallon

Way Oil

Provides a superior, tough, lubricating oil film on ways of crankshaft and crankshaft grinders, planers, millers, lathes and other machine tools.


ERSCO No.               Size

CH-640-05            5 Gallon


Honing Oil

Designed for all automatic and semi-automatic cylinder, line and rod honing operations. Also excellent for use in all valve grinders. 


ERSCO No.              Size

CH-645-05            5 Gallon

CH-645-20           20 Gallon

CH-645-30           30 Gallon

CH-645-55           55 Gallon

Soluble Oil

Milky white in solution coolant that works on both ferrous and non-ferrous metals. Contains high degree of anti-corrosion properties. 


ERSCO No.              Size

CH-720-05            5 Gallon

CH-720-20           20 Gallon

CH-720-30           30 Gallon

CH-720-55           55 Gallon

Synthetic Coolant-Blue

Designed for use in grinding and machining operations. 


ERSCO No.              Size

CH-726-05            5 Gallon

CH-726-20           20 Gallon

CH-726-30           30 Gallon

CH-726-55           55 Gallon

Synthetic Coolant-Pink

Designed for crankshaft, camshaft, fly wheel and fine finish surface grinding. 


ERSCO No.              Size

CH-729-05            5 Gallon

CH-729-20           20 Gallon

CH-729-30           30 Gallon

CH-729-55           55 Gallon

All Metal & Final Cleaner

Designed for cleaning metal parts in heated metal cleaning tanks and jet spray cabinets. 


ERSCO No.                Size

CH-1085-125            125 lbs.

CH-1085-200          200 lbs.

CH-1085-300          300 lbs.

CH-1085-470          470 lbs.

Hot Tank Aluminum Cleaner

A powdered, blended alkaline compound specifically designed for cleaning aluminum and other soft metal parts in heated tanks. 


ERSCO No.                Size

CH-1090-125            125 lbs.

CH-1090-200          200 lbs.

CH-1090-300          300 lbs.

CH-1090-470          470 lbs.

Jet Spray Compound for Aluminum & Cast Iron

A medium duty compound designed to clean both aluminum and cast iron in jet spray and hot tank applications. 


ERSCO No.                Size

CH-1095-125            125 lbs.

CH-1095-200          200 lbs.

CH-1095-300          300 lbs.

CH-1095-470          470 lbs.

Aluminum Renu

A powdered compound designed to clean aluminum while leaving a bright, satin finish. 


ERSCO No.                Size

CH-1098-125            125 lbs.

CH-1098-200          200 lbs.

CH-1098-300          300 lbs.

CH-1098-470          470 lbs.

Economical Jet Spray Compound for Cast Iron & Steel

The economical choice for jet spray applications. 


ERSCO No.               Size

CH-1150-125            125 lbs.

CH-1150-200          200 lbs.

CH-1150-300          300 lbs.

CH-1150-470          470 lbs.

Aluminum & Cast Iron High Performance Cleaner

Designed for the ultimate aluminum and cast iron cleaning. For use in jet spray cabinets and agitated tanks on all engines and transmissions. 


ERSCO No.               Size

CH-1195-125            125 lbs.

CH-1195-200          200 lbs.

CH-1195-300          300 lbs.

CH-1195-470          470 lbs.

Hot Tank Compound

Strongest hot tank compound for cast iron & steel on the market. Special emulsifiers pull grease and oil to the bottom of the tank. 


ERSCO No.                Size

CH-1400-125            125 lbs.

CH-1400-200          200 lbs.

CH-1400-300          300 lbs.

CH-1400-470          470 lbs.

Production Engine Rebuilders Cleaning Compound

Designed for shops requiring a higher and faster degree of cleaning performance. Use in jet spray cabinets & agitated tanks. 


ERSCO No.                Size

CH-1425-125            125 lbs.

CH-1425-200          200 lbs.

CH-1425-300          300 lbs.

CH-1425-470          470 lbs.

Cast Iron & Steel High Performance Cleaner

A new formula designed for heavy duty cleaning of all types of steel & cast iron components.


ERSCO No.                Size

CH-1525-125            125 lbs.

CH-1525-200          200 lbs.

CH-1525-300          300 lbs.

CH-1525-470          470 lbs.

After Oven Rust Remover

For use after thermal cleaning operation or when heavy duty rust stripping is needed. 


ERSCO No.                 Size

CH-1600-125            125 lbs.

CH-1600-200          200 lbs.

CH-1600-300          300 lbs.

CH-1600-470          470 lbs.

Rust Stripping Additive

A blended powdered additive designed to increase the rust stripping properties of caustic based cleaners. 


ERSCO No.                Size

CH-1700-10              10 lbs.

CH-1700-50            50 lbs.


Rust Inhibitor "N"

A booster additive for additional removal & control of rust.


ERSCO No.                Size

CH-7130-10             10 lbs.

CH-7130-50            50 lbs.


Service Products

ERSCO No.               Product

CH-01007                Hazardous Material Drum

CH-01008                Hazardous Material Label

CH-1013                    Titration Kit

CH-1014                    Ph Paper (Good for 50 Tests)

CH-1016                    Safety Apron

CH-34011                  Chemical Resistant Gloves - 14" (One Pair)

CH-34012                 Chemical Resistant Gloves - 14" (One Dozen Pair)

CH-34014                 Face Shield

CH-34022                Slic Sorb Oil Absorbing Blanket - (3' x 75')

CH-HRK-1000         OSHA Hazardous Response Kit